COLA LISTA Vinyl/Paper UHU

Description

UHU Adhesive for easy wallpapering of vinyl paper with paper or textile backing.

PRODUCT DESCRIPTION
Adhesive for easy wallpapering of vinyl paper with paper or textile backing on porous surfaces.

FIELD OF APPLICATION
Glue for easy wallpapering of vinyl paper, with paper or textile backing, on porous and absorbent surfaces such as plaster, stone, concrete, cement, plaster or wood. The glue is suitable for heavy paper and special types of wallpaper, such as foam vinyl and photographic paper.

CHARACTERISTICS

Ready-to-use wallpaper paste.
100% lump-free.
Easy to smooth.
Highly resistant.
Non-flammable.
For heavy wallpaper.

PREPARATION
Application conditions: Do not apply at temperatures below +10 °C or relative humidity above 70%.
Surface preparation: The surface must be clean, dry, smooth and free of dust and grease. Remove any paper residue first. Walls treated with latex must first be cleaned with a mixture of water and ammonia or solvent. Apply a coat of diluted paste to highly absorbent surfaces (1 part water to 2 parts paste). Allow the waterproofing coat to dry for at least 2 hours.
Tools: Wool roller or brush. Work with clean tools to prevent mould from forming on the adhesive. Clean tools with water immediately after use. APPLICATION Dilute: In general, it should not be diluted (unless the adhesive is used as a waterproofing layer: in this case, dilute with water according to the indicated ratio).-
Consumption: 5 m²/kg. Spread the adhesive evenly over the paper strips, especially the edges, using a brush. Fold the strips in half and allow the adhesive to set. Apply the strips by tapping them lightly and smoothing them with a brush or cloth from the centre towards the edges and from top to bottom. Press the joints firmly, using a roller if necessary. Apply the paper according to the manufacturer's instructions. Open time: approx. 20 minutes. Stains/residue: Without rubbing, remove glue stains with a clean, damp cloth. Tips: Use UHU Ready-to-Use Non-Woven Wallpaper Glue to easily hang all types of paper with a membrane backing.Points to note: Apply the paper according to the manufacturer's instructions. DRYING TIME* Drying/hardening time: approx. 24 hours * Drying time depends on the type of surface, the amount of product used, the level of humidity and the ambient temperature.

TECHNICAL CHARACTERISTICS
Moisture resistance: Good
Thermal resistance: 10°C to 50°C.

TECHNICAL SPECIFICATIONS
Basic raw material: Modified starch reinforced with copolymer.-Colour: White (transparent)
Viscosity: Thixotropic
Solid content: approx. 14%

STORAGE CONDITIONS:
Minimum 15 months after production and once opened, the container has a limited shelf life. Store in a tightly closed container in a dry, cool place protected from frost.